	Innovative Measurement Solutions Omniscan
HOME APPLICATIONS -Nanomanipulation/litho -Nanoscale surface science -Nanoscale topography -Microscale topography -Flatness/Waviness -Thin-film characterisation PRODUCTS -MFP3D -MicroXAM -MiniFIZ -OSP100/500 -XP-2/XP-1 -nkd7000/8000 TECHNOLOGIES - AFM - White light interferometry - Laser interferometry - Laser/confocal scanning - Stylus profiling - Spectrophotometry CONTACT Click on one of the above	MFP-3D Atomic Force Microscope ——Power and Flexibility in One Complete System Nanotechnology is one of the fastest growing areas of research in the scientific community. From bioscience to semiconductors, researchers are requiring more powerful tools to explore this tiny world. The Atomic Force Microscope (AFM), has been the instrument of choice for three dimensional measurements at the nanometer scale. With the MFP-3D AFM, scientists can now choose a sensitive and precise AFM with the lowest noise performance that also includes a complete scientific software environment. The MFP-3D has the flexibility to acquire your data, analyze it, and even make publication-ready graphics. Your imagination is your only limit. Lambda-digest DNA, 1.5µm scan, 2nm height features. Frustrated growth steps on a calcite crystal in super-saturated growth solution, 40µm scan. Epithelial cell heated to 37°C with the BioHeater, 80µm scan. The MFP-3D comes in two basic models, the MFP-3D Stand Alone and the MFP-3D Inverted Optical Model. MFP-3D Features Performance Benefits NPS Sensors - Corrects for piezo hysteresis and creep with the lowest noise levels, <0.6nm X, Y; <0.3nm Z (Adev) and sensor non-linearity <0.1 % (Adev/Full travel) at full scan in a 0.1-1kHz bandwidth. Z height noise <0.03nm. Unique Optical Lever Design - Low coherence light source and diffraction limited optics virtually eliminate interference with noise <0.03nm. Fully Digital Controller - 100% digital, low noise, fast USB connection. More than 25 megapixel image resolution possible. Features are easily added with software upgrades. SmartStart™ autoconfiguration for easy setup, DSPDirector™ for direct access to the DSP for advanced customization, Digital Q-Control for increased control of the tip-sample interactions while imaging. MicroAngelo™ - Built-in nanolithography and molecular manipulation capabilities come standard with each system without the need for extra hardware. Software - User-programmable based in IGOR Pro. Built-in graphing, page layout and Quicktime movie capabilities. Built-in cantilever calibration. OptoPort - Head OptoPort configuration available for optional top view optics for opaque samples, and transmitted illumination for transparent samples. XY Positioning Stage - Precise, crossed roller design for sub-micron positioning. Motorized stage also available. Stand Alone Base - Bottom view optics for easy tip positioning and sample viewing. Inverted Optical Base - Simultaneous optical (fluorescence, epi-transmission, etc.) and AFM measurements.

Innovative Measurement Solutions

Omniscan

APPLICATIONS
-Nanomanipulation/litho
-Nanoscale surface science
-Nanoscale topography
-Microscale topography
-Flatness/Waviness
-Thin-film characterisation

PRODUCTS
-MFP3D
-MicroXAM
-MiniFIZ
-OSP100/500
-XP-2/XP-1
-nkd7000/8000

TECHNOLOGIES
- AFM
- White light interferometry
- Laser interferometry
- Laser/confocal scanning
- Stylus profiling
- Spectrophotometry

CONTACT

Click on one of the above

MFP-3D Atomic Force Microscope ——Power and Flexibility in One Complete System

Nanotechnology is one of the fastest growing areas of research in the scientific community. From bioscience to semiconductors, researchers are requiring more powerful tools to explore this tiny world. The Atomic Force Microscope (AFM), has been the instrument of choice for three dimensional measurements at the nanometer scale. With the MFP-3D AFM, scientists can now choose a sensitive and precise AFM with the lowest noise performance that also includes a complete scientific software environment. The MFP-3D has the flexibility to acquire your data, analyze it, and even make publication-ready graphics. Your imagination is your only limit.

Lambda-digest DNA, 1.5µm scan, 2nm height features.
Frustrated growth steps on a calcite crystal in super-saturated growth solution, 40µm scan.
Epithelial cell heated to 37°C with the BioHeater, 80µm scan.

The MFP-3D comes in two basic models, the MFP-3D Stand Alone and the MFP-3D Inverted Optical Model.

MFP-3D Features Performance Benefits

NPS Sensors - Corrects for piezo hysteresis and creep with the lowest noise levels, <0.6nm X, Y; <0.3nm Z (Adev) and sensor non-linearity <0.1 % (Adev/Full travel) at full scan in a 0.1-1kHz bandwidth. Z height noise <0.03nm.
Unique Optical Lever Design - Low coherence light source and diffraction limited optics virtually eliminate interference with noise <0.03nm.
Fully Digital Controller - 100% digital, low noise, fast USB connection. More than 25 megapixel image resolution possible. Features are easily added with software upgrades. SmartStart™ autoconfiguration for easy setup, DSPDirector™ for direct access to the DSP for advanced customization, Digital Q-Control for increased control of the tip-sample interactions while imaging.
MicroAngelo™ - Built-in nanolithography and molecular manipulation capabilities come standard with each system without the need for extra hardware.
Software - User-programmable based in IGOR Pro. Built-in graphing, page layout and Quicktime movie capabilities. Built-in cantilever calibration.
OptoPort - Head OptoPort configuration available for optional top view optics for opaque samples, and transmitted illumination for transparent samples.
XY Positioning Stage - Precise, crossed roller design for sub-micron positioning. Motorized stage also available.
Stand Alone Base - Bottom view optics for easy tip positioning and sample viewing.
Inverted Optical Base - Simultaneous optical (fluorescence, epi-transmission, etc.) and AFM measurements.